The engine counts the bytes a copy, the pack or a resumed partial copy
supplied, and those the network brought. A transfer event carries both
after each progress event and once when the downloads end, so a screen
shows a download speed without guessing.
The walk no longer enters another drive mounted below the folder (it is
named instead), /proc, /sys, /dev or a Windows junction, and the root of
the system is refused. from_folder_problem() checks a folder without
reading it. A scanned event reports each folder read, cut short or not.
A file, ZIP member or folder below a --from folder that could not be
read was taken as no match. When its size is that of a file the run
still needs, or unknown, --check, --dry-run and an install now name it
with the reason, and an unreadable event carries it.
FAQ entry, the release_pack field and how to revisit it from download
counts, the get/ pages, and RetroPie 4.8 now installs from a computer with
the Pi's network folder as --dest. The start pages are back under their
word ceilings.
The plan offers the folder browser, mounted cards first and ZIPs listed,
to add --from (Options adds a second one, Left takes it back), checks the
folder again and says how many files it holds and how many are left to
download. Misplaced files are counted with a Show list of their reasons,
and a local copy no longer counts in the download speed. The found event
test now holds that the interface reads it after a check and an install.
Without a network, muOS and ArkOS launchers ask to copy the BIOS files from the card the system does not read (muOS bind.sh, dArkOS roms2), then install with --from and the pack. CI checks that shellcheck is present, and the test fails under CI without it.
A stop by SIGTERM (Start+Select under gptokeyb) reads the summary like
Ctrl-C and prints the count on disk. The systems filter keeps the ticks
and the focus. The bar names what A does on the focused row. Options
check the folder again, a missing network fails in 15 s with plain words,
an unwritable folder offers another one, a folder inside a card offers
its root, and only a failure keeps its log.
New event kind: checking, with files_done and files_total, while the
files in place are hashed. The exact event lists of the check and
install runs now carry two of them, for the two files in place.
The installer page gains a section on copying from an old card, the
found event, the error stage for a --from folder, and the reasons a
check gives for a Mac ._ file and a name in capitals. The first
install page says in a few lines how to copy the BIOS files from an
old card.
Control characters from names, folders and the installer's own text
are shown as ?, on screen and in the lines left after it. The terminal
mode and the signal handlers come back even when the last write fails
or a second signal arrives. A stop from outside hands the terminal
back, the second Ctrl-C is announced, speed reads the last seconds,
values are glued to their options, and counts read before a change of
options say so.
A bare install at a terminal of 40x12 or more opens a full screen that a
keyboard or a controller mapped to keys drives: setup, plan, install in
three presses, systems, regions, cores, game data, folder browser and a
dry-run preview one press away. The installer runs itself as a child with
--events for every check and install, the file list fetched once and
handed over with --manifest. --tui asks for it, --plain, RETROBIOS_PLAIN
and ACCESSIBLE keep the line questions.
--system nintendo-gba wrote system events for gb, gbc and ds, each made
of the few SkyEmu files the choice kept. With systems chosen, only those
are described.
The step for another folder now gives the command with --dest for each
system, the PowerShell one in its script block form. The check line that
means all good is shown whole, since an empty folder also reads 0 hash
mismatches. The port archive is said to come with releases cut after the
port, which v2026.10.10, the latest, predates.
An empty NO_COLOR turned colour off, which no-color.org reads as unset.
FORCE_COLOR and CLICOLOR_FORCE now paint a pipe. --check with several
platforms asks which to check rather than "Install for:", and
--list-platforms says when nothing is detected here.
Offline, the run printed "[Errno -2] Name or service not known". The
common failures now read as words, the raw text kept under --verbose.
A refused certificate under a clock set before the installer was written
is reported as reason clock, with the date it reads, and no trusted
certificate list on the machine as reason no_ca, naming SSL_CERT_FILE.
Neither is retried, and verification is never turned off.
--list-platforms said the MinUI layout was not written yet while
--from-pack and --dest wrote it. On the device the card root is now
found and its version.txt names the file list, and a card without one
gets the --platform and --dest to use. A core with no file of its own
says its files are the platform's, always kept, instead of 0 files.
--system gba, psx or ps1 was refused with no suggestion on RetroArch.
Short names now suggest the ids they stand for, never taken in their
place, and two aliases of one system name it once. --platform muos and
the other systems --list-platforms names stand for the file list they
get, and the run says which.
A folder typed in quotes at the BIOS folder question was used with its
quotes, and its missing parents were created without the question
--dest asks. The quotes go, ~ and variables expand on every system, and
a default folder that does not exist is named as such, not as found.
q at a menu now leaves with 130 like Ctrl+C, and Ctrl+C before anything
started no longer offers to carry on.
--check names why each flagged file is refused and where each core
opens it, and names a pack part missing from the folder from the
markers split_pack writes. --from-pack installs from a downloaded
pack or its parts with no network request, --manifest reads a saved
file list, both checking every hash. The end of a run names the
system or core that pulls most of the download when narrowing saves
over half.
Reading this project's own reports gets its own page. Checker code is linked at the revision each platform list was read from. Installer moves to Your setup, legal to Start here, build internals to Contribute, and Reference pages carry a group.
Platform guides, device groups, terminal tabs, pack README manuals and
logo credits move from Python tables to platforms/_guides.yml, checked
against the registry on load. A folder row without a path is the
registry's extract_to, written once.
Wiki pages place themselves in the navigation with order and nav_title
in their front matter. Generated docs/ and mkdocs.yml are unchanged.
The Start here pages ran 460 to 2,100 words and the first command of
Get your files sat 254 words down. Each page now opens on its action,
with short sentences and one fact per block. The facts a newcomer does
not act on moved one level down: the legal analysis to wiki/legal.md,
the project terms to wiki/reference-terms.md, the annotated run and the
installer failures to the installer page, collection figures to a new
Explore index.
tests/test_site_copy.py holds the budgets on the generated pages, and
the testing guide states them with their reasons.
Four statements the repository contradicts are rewritten: prboom.wad
is compiled into PrBoom (emulators/prboom.yml), Batocera reports a
mismatch as UNTESTED (batocera-systems checkBios), 13 hle_fallback
entries are required, and the gaps headline splits missing firmware
from game data and unread entries.
A BIOS folder can sit on a share other people write to. A retrobios-backup that is a link is no longer written through (the backup goes inside the BIOS folder instead), run folders are created for the user only and carry a marker, and --restore only takes a folder holding that marker, walking it without following links. Beginner pages label their links to the installer page as details.
A file in place whose contents differ (another revision, a personal
dump) was overwritten and lost. It is now moved to
retrobios-backup/<date-time>/ beside the folder written to, under the
same path, before the verified copy replaces it. Beside, not inside:
DuckStation, SwanStation and Rustation read every file of the BIOS
folder and BizHawk walks its firmware folder recursively.
Identical files are never kept. --dry-run counts what would be kept,
the summary and the summary event name the folder, files and bytes,
and --restore FOLDER puts the files back. Data trees and standalone
copies keep their replaced files the same way.
Five tabs from Start here to Contribute, a level on every page, a device picker on Get your files that lists every registered platform, and platform pages that open on where the files go, the command, the pack and how to check. FAQ and troubleshooting keep the questions asked before installing, the technical ones move to their own page, and getting started points to the pages that took its content.
install.py --no-game-data leaves out the files and omissions the manifest
marks game data, in an install, --check and --dry-run, and names them with
their category. The --events summary gains left_out, one group per
category with every destination. A list without categories is refused.
The installer page says how to get the port (PortMaster's catalog once
accepted, or RetroBIOS.zip in the autoinstall folder), what it shows and
needs, and why it carries install.py. The download page links to it
from the handheld table.
AmberELEC, PAN4ELEC and EmuELEC detection now installs their own lists
at /storage/roms, the root those lists are written against; KNULLI its
own list at /userdata/bios. JELOS, KOLOS, UnofficialOS and Arch R keep
RetroArch's list with the folder their retroarch.cfg names.
One JSON object per line on stdout (detection, per-file and per-system
check, download progress, summary, exit code) and the usual text on
stderr, so a program driving install.py never parses prose. EVENT_KEYS
is the one schema. The installer page documents it, and a test holds the
two equal. The handheld port reads it.
The Google Play and retroarch.com builds share com.retroarch and com.retroarch.aarch64 but build their defaults under different roots (RetroArch v1.22.2 MainMenuActivity.java:182-183). The build is told by the version code it records in retroarch.cfg, else by the folder it wrote. A Google Play folder Termux cannot write is named, as for DraStic and Flycast.
DraStic keeps its BIOS in its private data and Flycast in Android/data,
which Termux cannot write on Android 11 and later. An installed one is now
named with the files not copied, and a writable Flycast folder is a
standalone copy target.
RetroDECK moves each of its folders on its own and records the new place
in retrodeck.json paths (api_data_processing.sh:913-935). Only
rd_home_path was read, so files went to <home>/bios after a move.
AmberELEC, EmuELEC, JELOS, KOLOS, UnofficialOS, ArchR, PAN4ELEC, dArkOS,
RetroOZ, spruceOS, CrossMix-OS, Onion, Allium, Koriki, MiyooCFW and plumOS
are found by what their builds write, named as they name themselves, and
installed to the system_directory of their RetroArch config, which follows
ArkOS and dArkOS to a second card. TrimUI stock, MinUI and a plumOS build
without a known folder are named and not installed to. Two unrelated
systems matching stop a run without a terminal.
Without Python, install.ps1 at a console now offers to run winget install Python.Python.3.12, rereads PATH from the registry and carries on. The Store's python.exe placeholder fails the version check like a missing Python.
With no platform detected, a machine running standalone emulators (ES-DE with DuckStation and PCSX2) was offered RetroArch's folder. The installer now fills the emulator folders of the standalone copies list that exist here, from the EmuDeck then RetroArch file lists, asking first at a terminal.
Abdessamad Derraz