card_choice is the one reading of a card's root for --dest, the setup
list with --dest, a card listed, browsed, typed or numbered: a blank
stick named for KNULLI, ROCKNIX or a system no card file names gets its
folder below the root and the same note on the screen and in line mode,
kept on Create the folder? and the plan. The MinUI family refuses a blank
--dest. A card mounted as BIOS is that card, a folder inside another
system's card is refused up to the drive's mount point, a list named for
another system's card gets a note, a refused --dest emits an error
event. AmberELEC and EmuELEC get a card setup.
Offline, every surface says missing, not failed: no retry line, no
--from after --from, Nothing installed when nothing was, --check counts
what needs the internet, a suggested command keeps --offline.
Drive letters under WSL for every path option, shown as D:\.
The setup list names each card system's devices and puts the cards after
RetroArch when nothing is found (Onion: 4 presses at 40x12, was 10), the
filter and the line menu take a device name, one match is chosen in one
press. Line mode names the BIOS folder and the card picked, leaves the
save directory files out before its menu, offers f) to copy from a
folder. Confirm shows no Install while it counts, Back from the systems
lands on Install, help keeps its column, one spelling per device.
The offline line mode test opened a pty with pyte missing and errored where its neighbours skip. A comment in install.py also carried a clause semicolon that the prose style test refuses.
Every system that runs from its SD card comes from card_setups(),
derived from the device rules: the setup list, its filter, --platform
and the line menus give each its own row and ask for its card. The
RetroArch row no longer lists handheld systems.
card_root_folder and card_choice share one identity check: another
system's card is refused for every system, KNULLI and ROCKNIX included,
and the same --dest gives the same folder from every entry point. WSL
drive letters are read as typed, the line question lists only that
system's cards and asks again after no.
Offline at a terminal, files left out count as missing: the run ends
with code 1 or 2, as the full screen does. Continue on the systems list
opens Confirm. Wording and layout points of code_audit_13 and
tui_audit_6.
The line mode under --offline, with files that need the internet,
ended on Done with 0 files installed. It now counts them as not
downloaded and says --offline is why, not an answer.
Back from the systems list with nothing ticked keeps the ticks it
opened with, and None says First system once nothing is left to untick.
Confirm under --offline with nothing on hand has no Install, and the line
mode no longer asks to download what --offline never fetches. The line
mode counts the data files before its question.
Screen words: the checking clock starts at zero, a pack installs from
the pack, the copies found are said on a line of their own, the screen
of misplaced files says the copies stay, the save folder gets a line of
its own, the shared note is one line, a size keeps its unit, the same
save folder remedy on both screens, A Tick on the Miyoo bar, no Home
key in the help of a pad, and a system name said once with a pack.
A card system chosen on a computer, from --platform, the setup list, its
filter or the line-mode menu, always asks for its card. The card screen
lists only the cards whose files say they run that system, offers Look
again, and checks a browsed, typed or --dest folder as --dest is checked.
The line-mode Card root prompt lists the mounted drives, asks again on a
missing or foreign root, and asks before creating several folders. On the
device the detected folder is offered, and the bound card is forgotten
when another setup is chosen.
A long systems list opens on None. A there unticks every system and
moves to the first one, and A on a system with nothing ticked installs
that one alone, so Enter still continues. Inside muxterm, which keeps
PgUp and PgDn for its scrollback, Left and Right on the D-pad page.
One system of 66 at 40x15 took 17 presses with a pad, 57 in muxterm;
it now takes 12 on both. The pyyaml check of the device lists skips
where pyyaml is not installed.
A system that runs from its SD card (Onion, spruceOS, muOS, KNULLI,
MinUI...) named with --platform on a computer no longer takes that
computer's RetroArch folder: one mounted card of that system is used,
at a terminal the card root is asked, without questions the run stops
on the --dest example. The interface opens the card screen with the
mounted cards first.
The result pager scrolls and counts lines, so its last line is
reachable at every size. The setup filter knows the devices each
setup runs on, from the guides and the firmware pages. A new event
kind, data, gives the bytes of the data trees, and the plan shows
them.
--add-app, the result screen and a [y/N] question put the launcher of
muOS, KNULLI or ROCKNIX on the card the BIOS folder is on. The files come
from install/launchers/index.json at the same ref, each checked by size
and SHA-256 before the first is written, and the app event reports it.
The focused system's size is spelled out below the list when its name
leaves no room for it. The browser's system folder test is renamed
_os_folder: _system_folder already names the --from refusal.
One closed folder under HOME (~/.config/EmuDeck at 000) made the whole
detection return nothing: a RetroArch whose retroarch.cfg was readable
was lost and the run fell back to a folder it does not read. Every
detection probe now goes through _exists, _is_dir or _is_file, which
count a refused place as absent, name the closed folder once, and let
the other probes go on. The decorator stays as the last net.
The refusal is an unsearched event before detect. The interface keeps
the line above the list of setups. At HOME or a drive root A goes into
a visible subfolder, never a card or drive row nor .cache, and with
none it stays on Use this folder and says where it is. A default folder
taken because the platform was not found is no longer called detected.
With no usual folder the browser opened at HOME on Use this folder, and A pressed through the screens installed the BIOS files into ~. At HOME or a drive's root A now opens the first folder. Picking the old card to copy from is unchanged.
HOME kept across su without - made every detection probe raise PermissionError, and the run and the interface ended on a traceback. Detection now finds nothing there, says which folder this user cannot open and how to go on, on the first screen too.
The handheld launcher compared the idle close's line without install.py's RetroBIOS: prefix, and its test fake printed it the same way, so the device still waited 300 s: a test now ties both to TUI_IDLE_WORDS. The interface offered the built-in default folder when the folder found here could not be opened, a folder RetroArch does not read.
The old-card test read the screen without reading what the key just drew, and pressed Enter twelve rows past its folder on a slow runner. The launcher device now has a sudo that refuses, as a runner's passwordless sudo ran the fake mapper as root and recorded nothing.
An idle close exited 0 on every screen, an error one too. It now exits with the error's or the result's code and prints that screen's words after the idle line.
The save-folder line came from the check run only: after Choose systems the result named it for an unticked system, and the Confirm screen left it out for a kept one. The confirm, preview and install runs now carry their own saves event.
Path.exists() raised PermissionError from _missing_dest in line mode and from _choose in the interface. The run now names the folder and exits 1 (error event stage dest), and the interface asks for another folder.
A closed console answered ModuleNotFoundError from _terminal_gone inside run_tui's except block. The interface paths now run in a test with the POSIX modules gone.
The plan and the result now say how many files go to the save folder and
where, from a new saves event. With --from-pack they say the files come
from the pack, not a download. A stop asked for (Start+Select, SIGHUP)
ends on the plain outcome, without the log's last lines.
A window can still answer tcgetattr while refusing writes. The check now
tries both, as the audit asked, and takes the terminal itself so a stand-in
without a descriptor is never read.
Offline with nothing here to copy, Install was removed, and a folder
short of space or read-only then put Install anyway back: a run that
could only fail every file.
Any EIO was read as the window closing, so a failing SD card ended the
interface with 129 and no error.log. The error now counts as a closed
window only once the terminal itself no longer answers tcgetattr.
RETROBIOS_IDLE_EXIT only counted while the first screen was up. Given
--platform, the check runs and the plan follows without a key, so the
close never came. It now counts from the end of the last run, as long as
no key has been pressed.
gptokeyb2 owns the pad in muxterm on muOS with PortMaster, and muxterm keeps PgUp and PgDn for its scrollback. The launcher now says so with RETROBIOS_PAD=gptokeyb_muxterm, and the hints name the gptokeyb buttons with no paging key.
With --offline and no list, the full screen said No connection and
offered a Try again that could never work. It now names offline mode
and the two ways a run gets its list without the network. With a list,
the plan counted downloads the run forbids: it says what this machine
can supply and what needs the internet, and the printed command keeps
--offline.
The size column took half the line and cut every name to eleven
letters: Game Boy, Game Boy Advance and Game Boy Color read alike. A
system row now carries shorter size forms, and the longest one that
leaves the name whole is shown, none when that is what keeps it.
RETROBIOS_IDLE_EXIT=SECONDS: with no key on the first screen for that
long, before any choice, the interface exits 0 with one line. A mapper
that never opens the pad no longer freezes a handheld there.
A run given --dest detected nothing, so retroarch.cfg was never read:
the full screen, which names every folder, sent Azahar's keys.txt to a
guessed RetroArch/saves or dropped it without a word, where line mode
wrote it to savefile_directory. The configs are now read once when a
save directory is asked for, and the plan and the result say what was
left out.
--dest NOTMUOS/bios ended with MUOS/bios as text and passed as a muOS
card's folder. A card two systems claim now says so in one line, and
the system named among them decides the folder.
An owner file holding a number past a pid raised OverflowError before
the screen opened, and a full temp disk stopped the run on the owner
write. 0 and negative numbers are unknown owners, not process groups.
A closed window under a changing screen failed the draw (EIO, or a
termios.error from the SIGCONT that comes with SIGHUP) before the
signal was read, and the run ended on 1 with a crash log kept.
The hint bar, the help and the install's stop line read RETROBIOS_PAD:
gptokeyb, evmapy, muxterm and miyoo each name their own buttons and
none they lack. A desktop names keys only, SteamOS game mode and any
unknown run keep both names. On a Miyoo, A (Space) chooses, L1 and R1
page, and R2 goes back: B is Left Ctrl, which sends no byte alone.
SIGTERM and SIGHUP are handled from the start of the run, so a stop
during detection ends on the farewell. A closed window now ends with
129: once the last write fails, stdout and stderr point at /dev/null
and the flush at exit no longer turns the code into 120.
The speed is bytes_network over time, the interface's own guess at local
bytes is gone. The plan says when a --from folder was read only in part
or holds another drive, and how many files on the old card could not be
read, with a list of each reason. The --from folders are only checked
before the screen opens, never indexed there.
Abdessamad Derraz