The 8.5.0 source builds a standalone Amiberry and the libretro core, so
the profile is standalone + libretro again. A standalone name a build the
platform compiles itself answers to keeps meaning that build: RetroBat's
standalone amiberry is 8.3.0, and 8.5.0 runs there as the core only.
Batocera's x86_64 RetroArch downloads the amiberry, cemu and xemu cores
although the image builds standalone emulators of those names. They now
stay in installable_cores, run both ways, and reach only the boards whose
downloader offers them.
EmuELEC v4.8 ships no RigelEngine: rigelengine is a dependency of
emuelec-ports, which no package, options file or Makefile of an image
pulls in. The guard now reads advanced_drastic, which KNULLI alone
ships, and still refuses a bump until the profile says why its pin
moves.
installable_cores removed every buildbot name the image builds, so a
libretro core sharing its name with a standalone package was lost:
Batocera runs amiberry standalone and its x86_64 boards fetch
amiberry_libretro. A name now compares within its build mode, and the
resolver and the layouts treat such a core as the emulator's libretro
build, run both ways. Batocera gains amiberry, azahar, cannonball, cemu,
dosbox, ecwolf, eduke32, fsuae, openmsx, rpcs3, supermodel, vita3k, xemu
and ymir as installable, KNULLI cannonball.
RetroBat writes rom_path and whdboot_path below its amiberry emulator
folder and copies the kickstarts and rom.key it finds in bios into that
ROMs folder. The copies and both folders are launcher records, and the
8.3.0 standalone entries go to the emulators tree where the build reads
them.
A platform that builds Amiberry itself runs that revision under the name,
on every board it builds: RetroPie 5.7.2 and 6.3.3, Recalbox 8.2.2,
Batocera 7.1.1-332, KNULLI 7.1.1. The 8.5.0 profile is the buildbot
libretro core. It now names the ROM table's own file names and hashes
the keyboard MCU images.
KNULLI's RetroArch is Batocera's build with its core downloader on.
Its armv7 hard-float boards (atm7039, r16, rk3128) fetch from buildbot
linux/armhf: atm7039's shipped retroarch.cfg hides the menu entry but
leaves the URL, and Settings offers the entry back. Its aarch64 boards
get no buildbot URL. ecwolf, squirreljme, stella2014 and vemulator come
back as installable cores, and openmsx, which no buildbot list carries,
stays out.
Batocera builds RetroArch with its core downloader (configure defaults,
qb/config.params.sh:149-150), shown in the menu since it is no Lakka
build (config.def.h:743-745), and configgen sets no URL, so the compiled
one applies: buildbot linux/x86_64 or linux/armhf, none on aarch64
(config.def.h:1855-1861). The targets scraper names that list per board
(downloads, an armv7-A CPU read from arch/Config.in.arm), the builder
and the published target lists add it, and the platform names the union
as installable_cores. applewin, gong, squirreljme and vemulator come
back that way. A build option that compiles the downloader out, or a
shipped retroarch.cfg that blanks its URL, turns it off.
ROCKNIX listed retroarch, which stood for every libretro profile (351
resolved), while its devices build 124 libretro packages. The platform
list now names the cores those packages install on at least one device.
The targets scraper read a package's name as its core: vice-lr installs
vice_x128, vice_x64, vice_xpet, vice_xplus4 and vice_xvic, which reached
no device. It now reads each package's makeinstall_target, the file
copied to ${INSTALL}/usr/lib/libretro under its target name, through
TARGET_ARCH and ENABLE_32BIT (pcsx_rearmed-lr, desmume-lr). 155
profiles resolve, each built by a device, and no device loses one.
The 29 port engines depend on emuelec-ports, which no package of a
released image depends on, and flycast-dojo is in no device list: the
targets scraper already says so (UNBUILT). The platform list and the
launcher records now hold what at least one device image carries. Each
system keeps the list es_systems.json gives it, which says whose files
its entries ask for: VVVVVV's data.zip is still never served xrick's.
No Batocera board turns on BATOCERA_CORES_STILL_COMMERCIALIZED or
BATOCERA_CORES_EXPERIMENTAL (Config.in:109, 1670), so citron, ryujinx,
applewin and eka2l1 are not built, and freej2me, gong, squirreljme, uqm
and vemulator are selected by no Kconfig file at batocera-43.1. Read
with every sourced Kconfig file, the Pi 4 boards gain dxx-rebirth,
sonic2013, soniccd and xroar (mesa3d-rpi4 gives them OpenGL).
KNULLI's es_systems.yml is Batocera's model: it lists every emulator
its configgen knows, and its Config.in selects many of them only on
x86_64 boards, which KNULLI has none of. The platform list now holds
what at least one board selects, read by the targets scraper, plus a
program the launcher runs from the BIOS folder (lexaloffle). 59 cores
and 44 standalone emulators leave the list, with their launcher records.
The targets scraper follows Config.in and every file it sources, so a
select a package declares itself counts (Batocera's mesa3d-rpi4 gives
the Pi 4 OpenGL). A sourced file absent at the pin is named and read as
empty: KNULLI 20260511 sources package/utils/vtree/Config.in, added in
June.
A long checkout path wraps "BIOS folder:" after the label, and the
test joined the lines without the space it dropped. It now compares
without spaces, which holds for either wrap point.
EmuELEC 4.8 builds amiberry 452783a (CMakeLists.txt declares 8.0.0).
Same paths as 7.1.1, a ROM database with the PPC flash images, which
the scan hashes with their config bytes cleared, so no file hash is
declared for them. Tests check that ROCKNIX, AmberELEC and EmuELEC
resolve their own build, the other platforms the 8.5.0 profile, and
that ROCKNIX places its kickstarts at the BIOS root.
ROCKNIX builds amiberry 5c54536 (target.h declares 5.6.5). Every file
it reads lies below its start path, the working directory: the ROM
database dumps, aros-ext.bin, aros-rom.bin and rom.key in kickstarts/,
the WHDLoad booter files in whdboot/. Profiled from that revision,
pin_frozen with pin_build on ROCKNIX's package.mk.
The ROCKNIX scraper records the folder its start script enters and the
kickstarts link it carries there by copying /usr/config/amiberry, so
<cwd>/kickstarts binds to the BIOS root. A standalone + libretro profile
under a name the platform's own build answers to no longer resolves
there: ROCKNIX's amiberry is 5.6.5, not 8.5.0.
45 fonts from a PS4 firmware 11.00 dump (archive.org item
sony-ps4-system-font), checked against the item's md5 and sha1 and,
for 44 of them, byte for byte against the separate ps4font upload.
Each sits in the folder the console keeps it in: shadPS4 mounts
fonts/font and fonts/font2 as two guest folders (emulator.cpp:640-661),
so the ten font2 fonts move there and the seven font2 files the mount
also serves get entries.
The configs root place joins roms and emulator folders in the split
handed directories, and RetroBat's portable folder table keeps both
sides. Batocera, KNULLI and RetroBat records regenerated.
RetroBat passes XRoar -rompath bios/coco for the coco system, and its
es_features offers the CoCo 3 machines there. The per-system record now
carries those machines (machines:), and an entry whose name the
platform list does not declare is launched for the system offering
its own profile system as a machine, by _norm_system_id. coco3.rom and
coco3p.rom move from bios/dragon to bios/coco. RetroBat offers no
MC-10 machine, so the mc10 ROMs keep the default bios/dragon.
Sudachi.Generator.cs:28-30 creates user/ beside sudachi.exe, and
sudachi reads it as PORTABLE_DIR (path_util.cpp:92, fs_paths.h:9) in
place of %APPDATA%. Its keys now go below emulators/sudachi/user/.
Confirm has no Install row until its dry run ends, so an Enter sent
on its title alone fell on "Counting the files" and did nothing on
the runner. The test now waits for "Counted again for these choices",
drawn once the Install row exists.
Both binding sides kept: roms_place, named handles and environment
variable directories from integ run through the pool and per-system
binding of this branch. Batocera, KNULLI and RetroBat launcher records
regenerated from the merged extractors.
RetroBat's generators create user/ beside yuzu.exe and eden.exe and
portable/ beside Ryujinx.exe, which the emulators read in place of
%APPDATA% (PORTABLE_DIR, Ryujinx AppDataManager.cs:12, 60). Their keys
now go below emulators/<key>/.
Batocera and KNULLI start shadPS4 from CONFIGS/shadps4, so its user
folder sits below /userdata/system/configs. The scrapers read that root
from batoceraPaths and write configs_root with its source_ref. The
manifest names it configs_directory, and install.py honours it through
the same checks as roms_directory: character rules, at most two ups,
the ancestor match and the lexical bound.
The standalone Amiberry scans rom_path, ROMs below its content root by
default, for the ROMs of its database, without descending into
folders, and reads rom.key beside the Kickstart and the MT-32 ROMs
from mt32-roms. Those entries now carry standalone_path relative to
it, the four Kickstart labels holding slashes flattened. The kick*.rom
names stay the libretro build's.
Batocera's config_directories reads its rom_path save, KNULLI reuses
it. On Batocera, KNULLI and RetroPie the ROMs move from the BIOS root
to bios/amiga.
XRoar reads a ROM by name from the directories of rompath. The entries
take their file name as path, relative to ~/.xroar/roms or
${prefix}/share/xroar/roms, and rompath and -rompath are declared as
search lists.
Batocera records its rompath line, Recalbox -rompath bios/<system>
(the placeholder its extractor already writes), RetroBat its -rompath
as two records, bios/dragon and bios/coco for coco. An entry whose
name the platform list does not declare follows the launch its
profile system is listed under: Recalbox lists mc10.rom under
trs80coco, so alice.rom is read there.
Batocera ROMs move from the BIOS root to bios/xroar, Recalbox ROMs to
bios/dragon and bios/trs80coco, RetroBat ROMs to bios/dragon and
bios/coco. RetroDECK and RetroPie keep them at the BIOS root.
KNULLI's configgen-defaults.yml picks suyu for the Switch, which its
es_systems.yml does not offer and no package of its tree, its batocera
submodule or its buildroot builds: KNULLI does not ship suyu. A default
es_systems.yml does not offer now counts only when a package of the
build's trees has that name, or when its launcher runs a program from
the BIOS folder (Batocera's lexaloffle). Batocera's lists are unchanged
by the rule. suyu leaves KNULLI's cores, and the XDG_DATA_HOME record
that served it goes.
openMSX reads share/systemroms below OPENMSX_HOME or ~/.openMSX and
every filepool entry by SHA1. The profile paths drop RetroBat's
openmsx/ prefix and declare those directories and the filepool.
Batocera's config_directories reads the filepool lines its generator
writes, KNULLI reuses it. RetroBat records OPENMSX_HOME, RetroPie the
moveConfigDir of ~/.openMSX that its systemroms link lies in, and the
configure --prefix of xroar that its roms link lies in.
Batocera and KNULLI system ROMs move from openmsx/share/systemroms to
openmsx/, beside the files their own lists declare, RetroPie's to
BIOS/openmsx, the folder linked as share/systemroms.
A launcher record can name the systems it is written for, and then
replaces there what the records naming none hand: RetroBat passes XRoar
-rompath bios/coco for coco and bios/dragon otherwise. An entry is
launched for the systems it names and those the platform declares a
file of its name under. A {system} search_dir gives one directory per
platform system, a colon search path each of its directories.
standalone_pools names settings a program reads as a list of
directories, each searched like a layout subfolder (openMSX filepool,
XRoar rompath). Any entry serves: the one the platform list fills
comes first, then the first of the BIOS tree. A handle above a
declared directory lands it where its link points (configure
--prefix). Record order now survives the standalone set.
Batocera's 002-adjust-paths.patch rewrites Citron's KeysDir to
/userdata/bios/switch: patched_paths reads it from the patch, and KNULLI
from its batocera submodule at the pinned commit. Batocera and KNULLI
start shadPS4 from /userdata/system/configs/shadps4 (os.chdir), KNULLI
sets suyu's XDG_DATA_HOME to /userdata/saves/switch, and RetroBat creates
the portable user folder beside citron.exe and shadPS4.exe. Each platform
file differs from its scraper's full output by these records only.
A profile names a folder a handle rewrites as "<handle> = <subfolder>",
and a record setting a variable or a working directory a declared folder
is spelled from binds the whole layout below it.
A drive is refused only at the start of a value, so a later segment
such as ../C:x joins as a drive-relative path on Windows. Every
manifest path now refuses a segment Windows reads as a drive and one
ending with a colon. roms_directory, emulators_directory and the dests
below them refuse any colon. Elsewhere a colon inside a name is kept
where the host is not Windows: RetroDECK's ares reads
bios/snes:st018.data.rom and bios/zxs:48.rom on Linux, three dests of
install/retrodeck.json. A Windows host refuses them as alternate data
streams. The roms root is also checked to stay below the BIOS folder's
ancestor it climbs to.
roms_directory.from_bios and the emulators_directory folders come from a
downloaded list. from_bios now meets the character rules of every
manifest path (shared with _safe_relative_path: no backslash, drive,
empty segment, trailing slash or control), climbs at most two folders
(../../Roms, the deepest the rom folders files record) before plain
names, and its joined form must equal the BIOS folder's ancestor at that
depth: "." is the BIOS folder, null leaves the files out. Every
emulator folder the installer builds goes through _safe_relative_path
and stays below the folder holding the BIOS folder.
Run from the retrobios package, a hint and --help named python3 install.py, a file that user does not have. The package's launcher sets RETROBIOS_BOOTSTRAP=pypi, and the command is read from the environment it runs in: uvx retrobios from uv's cache, pipx run retrobios from pipx's, retrobios once installed.
platforms/romfolders/<platform>.yml records the roms root from the OS's
own source (roms_root path and from_bios), the same fact the registry's
roms_directory restated for ROCKNIX alone. The manifest's roms_directory
now carries from_bios, which the installer follows from a BIOS folder of
the platform's name, and the registry key is gone. A list that installs
above its BIOS folder (AmberELEC) holds its roms root in the install
tree: a file a launcher runs from there is a plain dest. emulators_directory
stays in the registry: no rom folders file names emulator folders.
RetroBat's Pico8 generator runs pico8.exe from AppConfig.GetFullPath:
the emulatorLauncher.cfg key, else the first existing of four folders of
the RetroBat install. The registry describes that search
(emulators_directory) and the manifest writes such a file as
root: emulators. The installer places it only when the BIOS folder sits
beside RetroBat's launcher config and the config does not move the
folder, and names it no_emulators_directory otherwise. Packs skip it as
they skip root: roms.
The PICO-8 0.2.7 Windows build (pico8.exe, SDL2.dll) is collected from
the archive.org copy of pico-8_0.2.7_windows.zip, its pico8.dat being
the 0.2.7 one already held.
lexaloffle documented two programs, so every platform naming PICO-8
received Voxatron's files: ROCKNIX, RetroDECK and RetroBat run PICO-8
only. Voxatron is its own profile, named vox_official. A platform also
runs the emulators its standalone_cores list names: Batocera and KNULLI
list lexaloffle there and nowhere else.
Kronos reads kronos/stvbios.zip, else stvbios.zip at the root of the
system directory, and a ST-V game stops without either
(libretro.c:1608-1617, 1676-1681 at the pin). The archive under
archive_prefix and the root copy are one need, but only loose entries
could be members, so the required-only pack carried both.
An archive's own entry now joins a set like a loose file. verify
--emulator and the emulator pack settle archive units with the loose
entries, the required-only pick covers them, find_undeclared_files
and cross_reference record them, and the unit under archive_prefix
ranks before the same name at the root. Its members still settle the
archive by their contents. Kronos' stvbios.zip is grouped stv-bios.
No other profile reads one archive under two paths: odin and
tgpulse_next_m1 place their own entries at the prefix path, and
flycast's naomi.zip has one path per build.
Abdessamad Derraz