installable_cores removed every buildbot name the image builds, so a
libretro core sharing its name with a standalone package was lost:
Batocera runs amiberry standalone and its x86_64 boards fetch
amiberry_libretro. A name now compares within its build mode, and the
resolver and the layouts treat such a core as the emulator's libretro
build, run both ways. Batocera gains amiberry, azahar, cannonball, cemu,
dosbox, ecwolf, eduke32, fsuae, openmsx, rpcs3, supermodel, vita3k, xemu
and ymir as installable, KNULLI cannonball.
A platform that builds Amiberry itself runs that revision under the name,
on every board it builds: RetroPie 5.7.2 and 6.3.3, Recalbox 8.2.2,
Batocera 7.1.1-332, KNULLI 7.1.1. The 8.5.0 profile is the buildbot
libretro core. It now names the ROM table's own file names and hashes
the keyboard MCU images.
KNULLI's RetroArch is Batocera's build with its core downloader on.
Its armv7 hard-float boards (atm7039, r16, rk3128) fetch from buildbot
linux/armhf: atm7039's shipped retroarch.cfg hides the menu entry but
leaves the URL, and Settings offers the entry back. Its aarch64 boards
get no buildbot URL. ecwolf, squirreljme, stella2014 and vemulator come
back as installable cores, and openmsx, which no buildbot list carries,
stays out.
Batocera builds RetroArch with its core downloader (configure defaults,
qb/config.params.sh:149-150), shown in the menu since it is no Lakka
build (config.def.h:743-745), and configgen sets no URL, so the compiled
one applies: buildbot linux/x86_64 or linux/armhf, none on aarch64
(config.def.h:1855-1861). The targets scraper names that list per board
(downloads, an armv7-A CPU read from arch/Config.in.arm), the builder
and the published target lists add it, and the platform names the union
as installable_cores. applewin, gong, squirreljme and vemulator come
back that way. A build option that compiles the downloader out, or a
shipped retroarch.cfg that blanks its URL, turns it off.
ROCKNIX listed retroarch, which stood for every libretro profile (351
resolved), while its devices build 124 libretro packages. The platform
list now names the cores those packages install on at least one device.
The targets scraper read a package's name as its core: vice-lr installs
vice_x128, vice_x64, vice_xpet, vice_xplus4 and vice_xvic, which reached
no device. It now reads each package's makeinstall_target, the file
copied to ${INSTALL}/usr/lib/libretro under its target name, through
TARGET_ARCH and ENABLE_32BIT (pcsx_rearmed-lr, desmume-lr). 155
profiles resolve, each built by a device, and no device loses one.
The 29 port engines depend on emuelec-ports, which no package of a
released image depends on, and flycast-dojo is in no device list: the
targets scraper already says so (UNBUILT). The platform list and the
launcher records now hold what at least one device image carries. Each
system keeps the list es_systems.json gives it, which says whose files
its entries ask for: VVVVVV's data.zip is still never served xrick's.
KNULLI's es_systems.yml is Batocera's model: it lists every emulator
its configgen knows, and its Config.in selects many of them only on
x86_64 boards, which KNULLI has none of. The platform list now holds
what at least one board selects, read by the targets scraper, plus a
program the launcher runs from the BIOS folder (lexaloffle). 59 cores
and 44 standalone emulators leave the list, with their launcher records.
The targets scraper follows Config.in and every file it sources, so a
select a package declares itself counts (Batocera's mesa3d-rpi4 gives
the Pi 4 OpenGL). A sourced file absent at the pin is named and read as
empty: KNULLI 20260511 sources package/utils/vtree/Config.in, added in
June.
ROCKNIX builds amiberry 5c54536 (target.h declares 5.6.5). Every file
it reads lies below its start path, the working directory: the ROM
database dumps, aros-ext.bin, aros-rom.bin and rom.key in kickstarts/,
the WHDLoad booter files in whdboot/. Profiled from that revision,
pin_frozen with pin_build on ROCKNIX's package.mk.
The ROCKNIX scraper records the folder its start script enters and the
kickstarts link it carries there by copying /usr/config/amiberry, so
<cwd>/kickstarts binds to the BIOS root. A standalone + libretro profile
under a name the platform's own build answers to no longer resolves
there: ROCKNIX's amiberry is 5.6.5, not 8.5.0.
The configs root place joins roms and emulator folders in the split
handed directories, and RetroBat's portable folder table keeps both
sides. Batocera, KNULLI and RetroBat records regenerated.
RetroBat passes XRoar -rompath bios/coco for the coco system, and its
es_features offers the CoCo 3 machines there. The per-system record now
carries those machines (machines:), and an entry whose name the
platform list does not declare is launched for the system offering
its own profile system as a machine, by _norm_system_id. coco3.rom and
coco3p.rom move from bios/dragon to bios/coco. RetroBat offers no
MC-10 machine, so the mc10 ROMs keep the default bios/dragon.
Sudachi.Generator.cs:28-30 creates user/ beside sudachi.exe, and
sudachi reads it as PORTABLE_DIR (path_util.cpp:92, fs_paths.h:9) in
place of %APPDATA%. Its keys now go below emulators/sudachi/user/.
Both binding sides kept: roms_place, named handles and environment
variable directories from integ run through the pool and per-system
binding of this branch. Batocera, KNULLI and RetroBat launcher records
regenerated from the merged extractors.
RetroBat's generators create user/ beside yuzu.exe and eden.exe and
portable/ beside Ryujinx.exe, which the emulators read in place of
%APPDATA% (PORTABLE_DIR, Ryujinx AppDataManager.cs:12, 60). Their keys
now go below emulators/<key>/.
Batocera and KNULLI start shadPS4 from CONFIGS/shadps4, so its user
folder sits below /userdata/system/configs. The scrapers read that root
from batoceraPaths and write configs_root with its source_ref. The
manifest names it configs_directory, and install.py honours it through
the same checks as roms_directory: character rules, at most two ups,
the ancestor match and the lexical bound.
The standalone Amiberry scans rom_path, ROMs below its content root by
default, for the ROMs of its database, without descending into
folders, and reads rom.key beside the Kickstart and the MT-32 ROMs
from mt32-roms. Those entries now carry standalone_path relative to
it, the four Kickstart labels holding slashes flattened. The kick*.rom
names stay the libretro build's.
Batocera's config_directories reads its rom_path save, KNULLI reuses
it. On Batocera, KNULLI and RetroPie the ROMs move from the BIOS root
to bios/amiga.
XRoar reads a ROM by name from the directories of rompath. The entries
take their file name as path, relative to ~/.xroar/roms or
${prefix}/share/xroar/roms, and rompath and -rompath are declared as
search lists.
Batocera records its rompath line, Recalbox -rompath bios/<system>
(the placeholder its extractor already writes), RetroBat its -rompath
as two records, bios/dragon and bios/coco for coco. An entry whose
name the platform list does not declare follows the launch its
profile system is listed under: Recalbox lists mc10.rom under
trs80coco, so alice.rom is read there.
Batocera ROMs move from the BIOS root to bios/xroar, Recalbox ROMs to
bios/dragon and bios/trs80coco, RetroBat ROMs to bios/dragon and
bios/coco. RetroDECK and RetroPie keep them at the BIOS root.
KNULLI's configgen-defaults.yml picks suyu for the Switch, which its
es_systems.yml does not offer and no package of its tree, its batocera
submodule or its buildroot builds: KNULLI does not ship suyu. A default
es_systems.yml does not offer now counts only when a package of the
build's trees has that name, or when its launcher runs a program from
the BIOS folder (Batocera's lexaloffle). Batocera's lists are unchanged
by the rule. suyu leaves KNULLI's cores, and the XDG_DATA_HOME record
that served it goes.
openMSX reads share/systemroms below OPENMSX_HOME or ~/.openMSX and
every filepool entry by SHA1. The profile paths drop RetroBat's
openmsx/ prefix and declare those directories and the filepool.
Batocera's config_directories reads the filepool lines its generator
writes, KNULLI reuses it. RetroBat records OPENMSX_HOME, RetroPie the
moveConfigDir of ~/.openMSX that its systemroms link lies in, and the
configure --prefix of xroar that its roms link lies in.
Batocera and KNULLI system ROMs move from openmsx/share/systemroms to
openmsx/, beside the files their own lists declare, RetroPie's to
BIOS/openmsx, the folder linked as share/systemroms.
A launcher record can name the systems it is written for, and then
replaces there what the records naming none hand: RetroBat passes XRoar
-rompath bios/coco for coco and bios/dragon otherwise. An entry is
launched for the systems it names and those the platform declares a
file of its name under. A {system} search_dir gives one directory per
platform system, a colon search path each of its directories.
standalone_pools names settings a program reads as a list of
directories, each searched like a layout subfolder (openMSX filepool,
XRoar rompath). Any entry serves: the one the platform list fills
comes first, then the first of the BIOS tree. A handle above a
declared directory lands it where its link points (configure
--prefix). Record order now survives the standalone set.
Batocera's 002-adjust-paths.patch rewrites Citron's KeysDir to
/userdata/bios/switch: patched_paths reads it from the patch, and KNULLI
from its batocera submodule at the pinned commit. Batocera and KNULLI
start shadPS4 from /userdata/system/configs/shadps4 (os.chdir), KNULLI
sets suyu's XDG_DATA_HOME to /userdata/saves/switch, and RetroBat creates
the portable user folder beside citron.exe and shadPS4.exe. Each platform
file differs from its scraper's full output by these records only.
A profile names a folder a handle rewrites as "<handle> = <subfolder>",
and a record setting a variable or a working directory a declared folder
is spelled from binds the whole layout below it.
Run from the retrobios package, a hint and --help named python3 install.py, a file that user does not have. The package's launcher sets RETROBIOS_BOOTSTRAP=pypi, and the command is read from the environment it runs in: uvx retrobios from uv's cache, pipx run retrobios from pipx's, retrobios once installed.
platforms/romfolders/<platform>.yml records the roms root from the OS's
own source (roms_root path and from_bios), the same fact the registry's
roms_directory restated for ROCKNIX alone. The manifest's roms_directory
now carries from_bios, which the installer follows from a BIOS folder of
the platform's name, and the registry key is gone. A list that installs
above its BIOS folder (AmberELEC) holds its roms root in the install
tree: a file a launcher runs from there is a plain dest. emulators_directory
stays in the registry: no rom folders file names emulator folders.
RetroBat's Pico8 generator runs pico8.exe from AppConfig.GetFullPath:
the emulatorLauncher.cfg key, else the first existing of four folders of
the RetroBat install. The registry describes that search
(emulators_directory) and the manifest writes such a file as
root: emulators. The installer places it only when the BIOS folder sits
beside RetroBat's launcher config and the config does not move the
folder, and names it no_emulators_directory otherwise. Packs skip it as
they skip root: roms.
The PICO-8 0.2.7 Windows build (pico8.exe, SDL2.dll) is collected from
the archive.org copy of pico-8_0.2.7_windows.zip, its pico8.dat being
the 0.2.7 one already held.
lexaloffle documented two programs, so every platform naming PICO-8
received Voxatron's files: ROCKNIX, RetroDECK and RetroBat run PICO-8
only. Voxatron is its own profile, named vox_official. A platform also
runs the emulators its standalone_cores list names: Batocera and KNULLI
list lexaloffle there and nowhere else.
Kronos reads kronos/stvbios.zip, else stvbios.zip at the root of the
system directory, and a ST-V game stops without either
(libretro.c:1608-1617, 1676-1681 at the pin). The archive under
archive_prefix and the root copy are one need, but only loose entries
could be members, so the required-only pack carried both.
An archive's own entry now joins a set like a loose file. verify
--emulator and the emulator pack settle archive units with the loose
entries, the required-only pick covers them, find_undeclared_files
and cross_reference record them, and the unit under archive_prefix
ranks before the same name at the root. Its members still settle the
archive by their contents. Kronos' stvbios.zip is grouped stv-bios.
No other profile reads one archive under two paths: odin and
tgpulse_next_m1 place their own entries at the prefix path, and
flycast's naomi.zip has one path per build.
ROM_5200_A, ROM_BASIC_A and six more are atari800.cfg keys, not names
atari800 opens: MatchByName knows only atariosa.rom and its kin
(sysrom.c:278-294), and the keys are config_key since 969907e29. The
twelve labels the scan identifies by CRC32 are found_by: content, and a
platform declaration of a file such an entry accepts by hash, in the
folder the core scans, now meets it: RetroDECK's ROM_BASIC_A answers
atari-basic-rev-a.rom without the alias.
A platform that binds part of a standalone layout leaves the entries no
binding covers in a folder outside the BIOS tree: they are no longer
packed at the BIOS root, and the manifest names them (root: emulator,
outside_bios_folder). A launcher that executes a profile's file binds
the program folder: in the BIOS tree, below the roms directory a registry
entry names (root: roms, installed into the folder holding the BIOS
folder), or nowhere a pack reaches. A moved entry resolves by its own
path as well as by its destination.
uae4all gains kick.rom and rom.key in its working directory and loses a
not_bundled_on that named Recalbox, which runs uae4all-rpi. lexaloffle
declares that its programs read beside their executable, lists the
Windows build RetroBat runs and the pico8_dyn ROCKNIX runs on x86_64.
ROCKNIX's start_pico8.sh runs pico8_64 or pico8_dyn from
/storage/roms/pico-8 and RetroBat's Pico8 generator runs pico8.exe from
its pico8 emulator folder. Both are recorded as exec records, read from
the scripts at the revisions the platform files pin.
Three changes to the search-list model, one commit because the readers
and the profiles must move together for the schema to hold.
Set requirement in a groups map. pom2 falls back on apple2.rom for the
][ and the ][+, and on apple2e.rom for the //e it boots and for the
unenhanced //e: one required on the file could not say both. A profile
now declares groups: {name: {required}}, a member writes no required
of its own (schema and validate_schemas refuse one) and load_emulator_
profiles derives it, true when one of its sets is. group takes a name,
a list, or a map from set to rank where the rank differs per set. pom2
is grouped from SystemProfile.cpp and MainWindow.cpp:246-296 at its pin.
One member per required set under --required-only. The pick is the
first the code reads among the held members the region filter leaves,
by rank then declaration order; a set the platform declares a member
of is carried by that declaration. The emulator pack, verify
--emulator, the platform pack, its manifest and verify --platform read
alternatives.required_only_spares or core_file_spares.
variant_group is now selection_slot: files a core chooses between by
a rule other than first found (disc territory for PicoDrive and
Pizza Boy SC, the o2em_bios option, a WebAssembly probe in SWF
Player). Where the code takes any one, the field became a group:
ARMSX1 (ArmSxBackend.java:149-157, name order), ePSXe (load_bios
0x433540-0x433621 of the 2.0.5 Linux x64 binary, one configured path,
HLE when BiosHLE is set), FPse and FPse-NG, DXX-Rebirth's HOGs
(inferno.cpp:472-512). odin and zesarux carried it with no effect.
slot.py compares ranks only between candidates that share a set.
The gap report never offers an entry the platform's list settles, so
AmberELEC's amiberry configs, which pass kick34005.A500.rom and
kick40068.A1200.rom beside a declared kick34005.A500, got nothing. The
launcher layer now reads the entries it was not offered, through the
setting or the extended name only: by its own name an entry left out of
the report was left out for a reason.
A record naming several files of one config lists their keys in the
same order (describe_keys). Each launcher place now carries its own
key, so AmberELEC's 5200a.rom receives the ROM_5200_A file.
MAME and libretro MAME pass /userdata/bios/<bootdisk>.img with -flop1
when the option is in the generator's list, else <bootdisk>.chd with
-hard. Each branch is a {bootdisk} template: the list the code tests
for the floppy, and for the hard disk the choices es_features.yml
offers that the list does not take. The menu offers macos3 while the
code tests macos30, so System 3.0 is passed as macos3.chd.
configureINI writes [Folders] Bios = ../../../bios/ps2 into
inis/PCSX2.ini, which PCSX2 and AetherSX2 resolve against the config
folder configgen hands it. relative_folders reads the call, the ini
path and the value, and records the resolved /userdata/bios/ps2 as a
passes_path for pcsx2 and aethersx2.
Abdessamad Derraz