AmberELEC and ROCKNIX install a retroarch.cfg whose system_directory
points every core at the BIOS folder. retroarch.yml (type utility, no
file, no system) reads that key, and ROCKNIX's systemfiles_in_content_dir,
at the RetroArch each one compiles: v1.22.2 and bdba046f. all_libretro
never picks a utility profile, and lists naming retroarch gain no file.
A libretro core option a frontend record writes stays the core's to
read: RetroDECK's pcsx2_bios keeps lrps2 as its reader.
duckstation.sh quotes its glob, so its copy names a file called * and
installs nothing. userconfig-setup copies /usr/config into
/storage/.config at every boot, an existing file kept (false | cp -i),
and /emuelec links there: that copy installs settings.ini and
advmame.rc. A quoted glob is no install, and a redirection ends the
copy's operands. Rescraped at v4.8: only these installs change.
RetroBat installs its stable archives, so each config_reads entry is
read at the build the binary names: Hatari 2.4.1, hatariB 0.3,
Hatari2014 at ab55c3e from the buildbot, Kronos 2.7.0 and Ymir 0.3.3.
SSF ships PreviewVer R28 and YabaSanshiro 1.20.32 has no public
source: binary_sha256 names the file their address refs are read in.
The seven RetroBat records citing an option list now hold.
KNULLI 20260511 ships libretro/mame lrmame0278 and GroovyMAME
gm0277sr221e (the batocera submodule's libretro-mame.mk and mame.mk).
mameGenerator.py and libretroMAMEConfig.py pass the Macintosh boot disk
as -hard. MAME names the option of a machine's one hard disk image by its
brief type name: harddriv.h:43 returns "hard", update_names keeps it
without an index (diimage.cpp:1131-1165) and the option entries are
registered under it (emuopts.cpp:389-404, 680-694), the LC III holding
one harddisk at scsi:0 (maclc3.cpp:266). GroovyMAME's diimage.cpp,
harddriv.h and maclc3.cpp equal mamedev mame0277.
The mame profile carries that read as config_reads with KNULLI's two
builds in pin_build, and both -hard records bind. The manifest does not
change: KNULLI's own list already puts mac608, mac701 and mac755.chd in
/userdata/bios, the folder the records search.
The scraper read emulatorLauncher master on every run, so an extractor
change was diffed together with upstream's commits since the pin. It now
rereads the commit platforms/retrobat.yml pins. --revision master moves
it, and check_freshness and refresh_stale pass that through the
registry's rescrape_args.
The extractors also read master (f681f435): Kronos and YabaSanshiro
fall back to sega_101.bin then mpr-17933.bin when the chosen BIOS is
absent, Ymir writes a forced BIOS only under its override flag, and a
folder created below bios (Ymir's cdb) is a passes_path record. At the
pin the 187 records are unchanged.
EmuELEC builds AdvanceMAME at 6a34ec0 (package.mk PKG_VERSION, v4.8).
At that build advmame.rc is read from the home, host and data folders
(advance/osd/emu.c:754-757, 779-791) and the dir_* keys set each search
folder (advance/osd/fileio.c:72-86, 798-815). With the config_reads the
launcher evidence rule asks for, EmuELEC's advmame.sh dir_rom records
bind again: its manifest gets back the 29 sets in roms/arcade and the
29 in roms/mame.
ES-DE starts standalone MAME with -rompath %GAMEDIR%\;%ROMPATH%/<system>
in 78 live commands across 54 systems (resources/systems/linux/
es_systems.xml at retrodeck-main-20261103-162710, 15e1b236; two more
are commented out). The command line outranks mame.ini, so RetroDECK's
MAME reads its sets in the roms folder each command names and in no
BIOS folder. The ES-DE rom folders parser now records, per folder, the
folders a standalone command passes as its ROM search path and the
machines it starts, or that the game is the machine (%BASENAME%).
Rescraped at the pinned revisions: retrodeck, emudeck and
emudeck-windows gain these records and nothing else.
A command reads the sets its machines load: the machine's own set, the
BIOS sets on its romof chain and the device sets with ROMs it
instantiates, from games/arcade/mame.json (mame0289 -listxml). That
index now also lists the game and device sets of each driver source
file, so a %BASENAME% folder reads for its board: neogeo and stv by
their BIOS root, cps1-3 and model2 by source file, daphne and laserdisc
by the laserdisc player devices, gameandwatch and lcdgames by the
handheld sources, any other (arcade, mame, consolearcade) for every
machine. The published installer copy of the index leaves the sources
out.
Manifests: RetroDECK gains 1399 files, 378.2 MB, below roms/. Of the 219
sets named as read outside the BIOS folder, 58 reach 146 files (25.9 MB),
161 stay named, no command's machine reading them. 441 sets RetroDECK's
list also declares at bios/ reach 1253 files (352.3 MB), 429 each in
arcade and mame and 480 in consolearcade. No other platform changes.
Where each shipped build finds the config a platform installs and reads
every key it opens a file from, read at the build the platform ships:
duckstation (EmuELEC, ROCKNIX, RetroBat), xemu, armsx2, hatari, melonDS,
dsperate, NanoBoyAdvance, mednafen (ROCKNIX's sydarn fork) and ares,
gzdoom, xroar, lrps2 and the amiberry builds at their pins. pin_build
names the builds ROCKNIX, EmuELEC and AmberELEC compile, revision the
ones RetroBat and Flathub install unpinned.
tests/test_launcher_evidence.py covers the rule, the extractor helpers,
the invariants and the chains that move placements.
MAME 2000, 2003, 2003-Plus, 2009, 2010, 2014, 2015, 2016 and UME 2015
search the folder of the loaded game for their sets and never the system
folder: osd_get_path gives FILETYPE_ROM the content path (mame2003 and
mame2003-plus src/fileio.c:217-220), -rompath is MgamePath (mame2009
retromain.c:432-434, mame2014 retromain.c:1851-1856, mame2015 and
ume2015 retromain.c:1980-2042, mame2016 retromain.cpp:1364-1402), ROMs
open with libretro_content_directory (mame2010 romload.c:667-685) or
IMAMEBASEPATH (mame2000 libretro.c:1044-1053, 1247). Their 421 sets are
load_from: content_dir. Samples, artwork, cheats and the data files read
from the system folder keep their paths.
A set read beside the game goes to the roms folder of each system the
platform launches the core for: libretro_systems, the default core of a
rom folder, the cores a system offers under its own name, the systems a
RetroPie package registers (the lr-mess packages build SUBTARGET=mess,
lr-mess2016.sh:31, and read none of these arcade sets). A roms root in
the install tree takes a plain dest, as a standalone entry placed there.
A platform with no folder per system, or none it can place (RetroArch,
Lakka, RetroBat, EmuDeck, MyMinUI), names the set as read outside the
BIOS folder. EmulatorJS writes the BIOS and the game to one folder
(emulator.js:845, 990, 1054): RomM keeps its firmware entries. Game data
read beside the content is left to the game.
Manifests: roms folders gain 408 files on RetroDECK, 182 on RetroPie,
179 on Recalbox, 140 on AmberELEC, 134 on KNULLI, 52 on Batocera and
ROCKNIX, 39 on EmuELEC. BIOS root copies no other core reads leave: 80
on RetroArch, Lakka and ROCKNIX, 61 on EmuELEC, 60 on Recalbox, 59 on
AmberELEC, 57 on RetroPie, 26 on MyMinUI, 20 on RetroDECK, 19 on
Batocera and EmuDeck, 16 on KNULLI, 13 on RetroBat. verify --all keeps
its severity and status counts.
Every board always sets --every-board. A board list that failed is fetched again, once and with the list's timeout. A pack is read only once the screen takes it, and a ZIP that is no pack is closed. Another setup drops the board and emulators, and names a new list lacks are left out and said. PgUp and Home never rest on a heading. Without the internet is refused for a target whose board list is not held.
RetroBat's es_features.cfg and KNULLI's es_features.yml list the values
a menu offers. They move out of source_ref into choices_from, beside the
generator that writes the choice. RetroBat's xemu flashrom record holds
outside a Chihiro launch (Xemu.Generator.cs:48, 284), and KNULLI's
libretro boot disk records name the one core es_features offers them
for. Rescraped at the pinned revisions.
ROCKNIX, EmuELEC, AmberELEC, EmuDeck and RetroDECK records citing a
config now carry the code installing it, whether that keeps a file
already there, and the launch code rewriting its keys. Rescraped at the
pinned revisions.
Records the shipped code never reads are no longer written: EmuELEC's
mame.ini folders (MAME.opt turns paths off), AmberELEC's atari800.cfg
(read only under an option that is off), the six RetroDECK XRoar ROM
lists no machine looks up, and the ROCKNIX melonDS DSi BIOS keys
(DSiExternalBIOSEnable is set by no shipped ini).
Conditions added: ROCKNIX and AmberELEC amiberry kickstarts hold only
outside a WHDLoad --autoload boot, ROCKNIX NanoBoyAdvance exits without
its BIOS, the EmuELEC scummvm.ini copy runs from an action no launch
passes, and the EmuDeck melonDS.toml keys need ExternalBIOSEnable (DS)
or ConsoleType 1 (DSi).
A launcher record citing a config, option or feature file binds only
when the platform's code installs the file (installs), its launch code
was read for what replaces it (overrides), and the emulator's profile
shows where the shipped build loads it and reads each key
(config_reads, read at pin_build). Unproven records place no file and
hand no directory. verify, cross_reference and the platform page list
them apart, outside severity and --strict.
Change replaces Options and groups every option by intent. Device chooses --target or --every-board, the board read on the device or named by the card first and chosen. Emulators ticks --emulator. From a pack and Without the internet are rows of their own. Parity tests install the screen's argv and the flag's into two folders and compare dest and sha1.
Readme claims give way to the boot routine of SSF.exe R38: the Saturn
BIOS must read 0x80000 bytes, a failed read or NoBIOS falls back to the
embedded boot ROM, so the BIOS is optional with an HLE fallback, and
ST-V reads its EPROM whatever NoBIOS says.
A body is written as .md and the decoration pass, after the sweep,
gives a page with components its .mdx name. The sweep did not count the
.mdx of the run before as produced: 402 pages were deleted and written
again on every run, so write_if_changed never kept their bytes.
The word and the page title were split by a <br> only, which a copy,
textContent and an assistant read as "PreviousWhat the packs do not
hold". The override keeps Starlight's look, spaces them, names each link
by direction and page, and makes the pair a navigation landmark.
sitesources.py --fetch records the three pinned trees the merged
profiles added and drops paths they no longer cite. generate_site.py
records the new MSX part pages.
GZDoom now declares the path of each IWAD, so their files resolve by
path and these ids count as held. Their IWADs sit in the Doom folder,
and no parent led them there: the Doom section is theirs too.
The -home, -palette, DEFAULT.Z80 and Sam Coupe claims now cite the
option table and loaders of the Speccy 5.9 desktop binary. Quotes with
no code behind them are gone.
Notes now cite code for the fpRam directory, the registry keys and the
Tables path, and drop the manual, installer and Batocera changelog
wording. The code spells the directory fpRam.
The four camera plugins link OpenCV statically. Refs now cite the
CascadeClassifier::load call, its path built from the plugin directory
and the three-entry table, and the empty detector that follows a
failed load.
The step from the frame's create handler down to Memory::Init was
inferred from the error message. Refs now give the chain through
AfxWinMain, InitInstance, the message map, VM::Init and the device
vtable, and the notes say where the SRAM machine index is set.
The media board ROM ref now cites the XBE directory build, the boot.id
exists test that makes the system Chihiro and the gate that skips the
ROM checks in TeknoParrot's cxbxr-emu.dll.
Each built-in ROM resource of Caprice.exe 26.4 is listed with the sha1
of its bytes and the dump it equals in this and other profiles. The
release date taken from History.txt is gone.
Generated and built pages read without the stylesheet, skipping hidden,
aria-hidden, scripts and styles: no step or figure text read twice, no
counter glued to a label, no empty picker, every laid out box spaced.
The build's filter box is compared with the generator's through node.
Tiles read "BizHawkWindows, Linux", stats "168/168Coverage" and a
file row "SVI603.ROMbios/Machines/...OK": the stylesheet lays them
out as boxes, the markup had no space between them. A setup without a
logo draws its initials from the stylesheet, so its name is read once.
A filter box read "Filter Options41 rows" in the page text and the
file picker an empty "Setup Choose a setup": both do nothing without
the script. They are written hidden, keep their room so nothing moves,
and site.ts or the picker's script shows them. The count describes the
input and is spaced from the label. One box markup for the build and
the generator, and the Markdown copy skips hidden chrome.
An inline SVG put every label of both layouts, its title and its desc
into the page text, next to the prose that already says the steps: a
text dump of the Steam Deck tab read the steps three times, glued.
Each drawing is now one SVG file per layout and theme under
assets/diagrams, shown through <picture> with alt="". The figure says
its words once, in one screen-reader line and its caption.
A source_ref part that names a compiled image now has to carry an
address, a decompiled function or an IL method. An import directory, a
string table or readelf output only says the binary exists. A name
under a directory is a file of the tree and a .dll.map is not a DLL.
The exception list is empty: every closed profile now cites code.
The flag, star, FAQ and notice assets cited format strings only. They
now name the decompiled methods that build each asset path and open it
through the AssetManager or a WebView, in all three builds.
Import and .rdata citations now name the loader, LoadLibrary, cascade
and SQLite call sites in BAM.dll and its plugins. TrackIR.dll keeps the
NPClient.dll Future Pinball loads, Kinect10.dll is imported by the two
Kinect plugins only, and the PostFX, iCom and OpenVR configs gain
entries.
Import directory lines and manual pages gave way to the IAT ranges and
the calls that use each library in Future Pinball.exe 1.9.1.20101231.
fpLatestTables.xml is written by the program, not by libcurl.
Abdessamad Derraz