Abdessamad Derraz
241b50c749
From archive.org msdos_DUKE2_shareware DUKE2.zip (md5 bc30f5520e452bac6866deb37ef918b2), the release RigelEngine points to. The archive holds neither LCR.MNI nor O1.MNI, the registered markers.
BIOS and firmware files for Batocera, BizHawk, EmuDeck, Lakka, MiSTer FPGA, ROCKNIX, Recalbox, RetroArch, RetroBat, RetroDECK, RetroPie, and RomM, one pack per platform.
A pack holds the files its emulators read, as their source code names them, and leaves out what the emulators install themselves.
Quick install
Copy one command into your terminal:
# Linux / macOS / Steam Deck
curl -fsSL https://raw.githubusercontent.com/Abdess/retrobios/main/install.sh | sh
# Windows (PowerShell)
irm https://raw.githubusercontent.com/Abdess/retrobios/main/install.ps1 | iex
# Android (Termux, after pkg install python and termux-setup-storage)
curl -fsSL https://raw.githubusercontent.com/Abdess/retrobios/main/install.sh | sh
# SD card mounted on a PC: --dest is the BIOS folder on the card
# (RetroArch on Switch: retroarch/cores/system, on Android: RetroArch/system)
curl -fsSL https://raw.githubusercontent.com/Abdess/retrobios/main/install.sh | sh -s -- --platform retroarch --dest /path/to/sdcard/retroarch/cores/system
# Options in PowerShell: anything after | iex goes to iex, so the script runs as a block
&([scriptblock]::Create((irm https://raw.githubusercontent.com/Abdess/retrobios/main/install.ps1))) --check
The script auto-detects your platform, downloads only missing files, and verifies checksums. Every option, and what the installer detects and writes, is on the installer page.
Download BIOS packs
One pack per platform, and it holds everything the platform runs: its own BIOS list plus every file its emulator cores load. Pick your platform, download the ZIP, extract to the BIOS path. The installer above does the same file by file. At a terminal it asks whether to install everything or to choose systems, cores and regions, and --system, --core, --region and --target make the same choice without questions. For a bare minimum, build your own pack below.
A pack over 2 GB comes in several parts (Pack.part1of2.zip, Pack.part2of2.zip), and every part is needed. Each part is an ordinary ZIP: extract them all into the same folder.
Every release ships SHA256SUMS.txt and a detached signature of it, checkable against allowed_signers in this repository: verifying a release.
The Files column counts what a pack holds once extracted, the figure a file manager shows for the folder. It differs from one platform to the next because a pack carries only what that platform's emulators load. The size is what the files occupy once extracted, and the ZIP itself downloads smaller.
| Platform | Files | Extracted size | Extract to | Download |
|---|---|---|---|---|
| Batocera | 12,810 | 7.5 GB | /userdata/bios/ |
Download: part 1 of 3, part 2 of 3, part 3 of 3 |
| BizHawk | 950 | 2.4 GB | Firmware/ |
Download |
| EmuDeck | 620 | 3.2 GB | ~/Emulation/bios/ |
Download |
| Lakka | 8,504 | 6.0 GB | /storage/system/ |
Download: part 1 of 2, part 2 of 2 |
| MiSTer FPGA | 83 | 29 MB | /media/fat/games/ |
Download |
| ROCKNIX | 5,804 | 6.1 GB | /storage/roms/bios/ |
Download: part 1 of 2, part 2 of 2 |
| Recalbox | 3,222 | 3.9 GB | /recalbox/share/bios/ |
Download: part 1 of 2, part 2 of 2 |
| RetroArch | 8,504 | 6.0 GB | system/ |
Download: part 1 of 2, part 2 of 2 |
| RetroBat | 12,399 | 7.9 GB | bios/ |
Download: part 1 of 3, part 2 of 3, part 3 of 3 |
| RetroDECK | 7,793 | 8.0 GB | ~/retrodeck/ |
Download: part 1 of 3, part 2 of 3, part 3 of 3 |
| RetroPie * | 12,533 | 8.1 GB | ~/RetroPie/BIOS/ |
Download: part 1 of 3, part 2 of 3, part 3 of 3 |
| RomM | 1,087 | 1.5 GB | library/bios/ |
Download |
The RetroDECK pack already carries its own bios/ folder, so it extracts into ~/retrodeck/ rather than into the BIOS folder.
* Archived: the configuration is kept and packs are still built, but upstream is no longer scraped on a schedule.
What's included
BIOS, firmware, and system files for consoles from Atari to PlayStation 3. These are the files an emulator loads from disk instead of carrying inside itself. Some are required to boot a system, others improve accuracy or unlock a feature, and the packs carry both.
Each file is checked the way your platform checks it. Most compare a checksum, the fingerprint of a file's contents, which catches a corrupt or unexpected copy. RetroArch, Lakka and RetroPie check that the file is present under its name without reading its contents (path_is_valid in RetroArch's core_info.c): the Coverage table says which applies to you. Independently of that, the collection records five fingerprints per file, and wherever an emulator's code states an expected size or hash, that value is read from its source and rechecked here.
- 938 files the platforms' emulators load are still to be found, and 137 more cannot be sourced at all (per-user keys, user-filled slots, dumps nobody has made). Both are named in the gap analysis
- 12 platforms supported with platform-specific verification
- 607 emulators profiled from source (RetroArch cores + standalone)
- 533 systems handled by those emulators (NES, SNES, PlayStation, Saturn, Dreamcast, ...)
- 19,526 files in the collection, each with its SHA1, MD5, SHA256, CRC32 and Adler-32 fingerprints: 5,743 system files, 2,851 arcade ROM sets, 10,932 game and engine data files. That is every platform and emulator together, so no pack holds them all: each carries what its own emulators load, counted in the download table
- 555 of 5,743 system files matched to dump-preservation catalogs (No-Intro, Redump, TOSEC). Arcade sets and engine data fall outside what those catalogs index
- 15.6 GB for the whole collection
Supported systems
NES, SNES, Nintendo 64, GameCube, Wii, Game Boy, Game Boy Advance, Nintendo DS, Nintendo 3DS, Switch, PlayStation, PlayStation 2, PlayStation 3, PSP, PS Vita, Mega Drive, Saturn, Dreamcast, Game Gear, Master System, Neo Geo, Atari 2600, Atari 7800, Atari Lynx, Atari ST, MSX, PC Engine, TurboGrafx-16, ColecoVision, Intellivision, Commodore 64, Amiga, ZX Spectrum, Arcade (MAME), and 499+ more.
Full list with per-file details: https://abdess.github.io/retrobios/
Coverage
| Platform | On its BIOS list | Files its emulators load | Checked by |
|---|---|---|---|
| Batocera | 353/353 | 13,909/14,998 | MD5 hash |
| BizHawk | 118/118 | - | SHA1 hash |
| EmuDeck | 168/168 | 8,140/8,217 | MD5 hash |
| Lakka | 532/532 | 7,569/7,627 | file presence |
| MiSTer FPGA | 81/81 | - | MD5 hash |
| ROCKNIX | 38/38 | 7,059/8,328 | MD5 hash |
| Recalbox | 351/351 | 2,746/2,909 | MD5 hash |
| RetroArch | 526/526 | 7,577/7,618 | file presence |
| RetroBat | 348/348 | 4,727/9,193 | MD5 hash |
| RetroDECK | 2,007/2,008 | 6,241/6,492 | MD5 hash |
| RetroPie * | 532/532 | 7,845/12,363 | file presence |
| RomM | 383/383 | 83/846 | MD5 hash |
Each fraction is what the pack has over what is needed, counting required and optional files alike since both ship. The first column is the BIOS list the platform publishes. The second counts files its emulators load that this list never mentions, found by reading their source code, and it is routinely several times larger. A short fraction means files are still missing, and they are named in the gap analysis. That second number is a floor, not a ceiling: an emulator that accepts any file handed to it names none in its code, so nothing there can be counted. Checked by is the test your platform runs on its own, replicated here from its source code, so the result matches what you would see in the frontend (how each one works).
Build your own pack
Clone the repo and generate packs for any platform, emulator, or system:
# The pack of a platform, as released
python scripts/generate_pack.py --platform retroarch --output-dir dist/
python scripts/generate_pack.py --platform batocera --output-dir dist/
# Single emulator or system
python scripts/generate_pack.py --emulator dolphin
python scripts/generate_pack.py --system sony-playstation-2
# One region, best first, one file per system and region
python scripts/generate_pack.py --platform retroarch --region us,eu,jp
python scripts/generate_pack.py --platform retroarch --region us --one-per-slot
# List available emulators and systems
python scripts/generate_pack.py --list-emulators
python scripts/generate_pack.py --list-systems
# Coverage of this repository's collection per platform, emulator or system
# (it reads database.json and bios/: for your own BIOS folder, run the installer with --check)
python scripts/verify.py --all
python scripts/verify.py --platform batocera
python scripts/verify.py --emulator flycast
python scripts/verify.py --platform retroarch --verbose # emulator ground truth
Requires Python 3.9 or newer and pyyaml. The one-line installer alone runs on Python 3.8.
Documentation site
The documentation site provides:
- Per-platform pages with file-by-file verification status and hashes
- Per-emulator profiles with source code references for every file
- Per-system pages showing which emulators and platforms cover each console
- Gap analysis identifying missing files and undeclared core requirements
- Cross-reference mapping files across 12 platforms and 607 emulators
- Versioned data access through JSON, CSV and SQLite exports with published SHA-256 checksums
How it works
A platform's BIOS list and an emulator's code are maintained separately. Each list is compared with the emulator source code, file by file where a profile exists, and where the two differ the code decides.
Hashes document what emulator code loads and accepts, not dump provenance. That boundary, and how it relates to preservation catalogs such as No-Intro, is drawn in the FAQ.
- Read emulator source code: trace every file the code loads, its expected hash and size
- Cross-reference with platforms: match against what each platform declares
- Build packs: include baseline files plus what each platform's cores need
- Verify: run platform-native checks and emulator-level validation
Contributors
Community tools
- BIOS Preservation Tool by monster-penguin - scan, verify, and stage your own BIOS collection using RetroBIOS hash metadata
Contributing
See CONTRIBUTING.md for guidelines.
License
The scripts and tooling are released under the MIT License. The BIOS and firmware files are not covered by that license: they are third-party system software, preserved and provided for personal backup, archival, and interoperability with emulation software. NOTICE sets out their status and how to ask for a file to be removed. The reasoning, and where it is weakest, is in the FAQ.
Auto-generated on 2026-10-21T11:49:25Z